Loading... Please wait...

Ride Improvement System (RIS) 2017 Can Am X3 RS Max

Hover over image to zoom

  • X3 RS Max stock
  • Max with Level 2 RIS. Shock internals and spring kit
  • Max with Level 2 Ris. Shock internals and spring kit
  • Max, front end with spring kit and much higher ground clearance of 16"
  • Max, Rear end with spring kit and much higher ground clearance of 15.5
Call us to set up an appointment
SKU:
200-250-01

 Product Description

Ride Improvement System 2017 Can Am X3 RS Max

 

 

 Internal shock mods and spring packages are fully tested and in stock now! There is no doubt that Can Am's newest fully optioned entry into the UTV market is a beast. Class leading travel numbers combined with a stout engine and steering package make this car a pleasure to drive at all speeds. The internal bypass Fox shocks work very well, but after extensive testing, we felt there were many ways we could improve on the stock suspension performance. Some of the things we wanted to fix were:

1. Stiff ride quality at slow speeds and can't adjust the shocks soft enough to eliminate this

2. Stiff ride quality in the small chop and rocks

3. Harsh compression hit in the whoops at speed

4. Rear bucking in the whoops

5. Jumping rear high and nose low.

6. Low ground clearance contributing to bottoming out

7. The shocks just felt too stiff or too soft. They don't have the progressive nature needed to get a plush ride with no bottoming out

 

 RIS Stage 1

    With these things in mind we dove straight into the shocks looking to make improvements. It didn't take long to find that most of the nasty snap the car had in it's compression stroke was due to shock internals from the factory. Because the shocks gain stiffness instantly the factory also added excessive rebound dampening to lessen the compression ill effects which combined to create most of the problems we wanted to cure. Once we changed the valving the car started to show real promise but valving alone was not enough. We changed piston oil flow characteristics, shock shaft mods and adjuster improvements as well to get the best working system. Small chop and chatter is vastly improved. The whoops become smoother and less harsh. Rear bucking is all but eliminated in both the whoops and jumping. Adjust ability in the dual stage compression adjuster is widened to control a larger range. In a nut shell, our internal shock mods and machine work creates a ride that is both smooth and plush in the small stuff but also extremely progressive compression ramping that keeps you from bottoming out in the biggest hits even with a plush ride every where else.

RIS Stage 1.........$749.95 for all 4 shocks

 see our Series 6 internal bypass tube upgrade below!

RIS Stage 2

  Having already tested our Dual Rate spring kits for the X3 RS Max, were excited to combine our shock work with that spring kit and see what the potential was. WOW is all that we can say. All of the internal improvements we made to the shocks ride quality were now doubled with the spring kit. Twice as plush, twice as smooth in the whoops and way more bump stage for jumping and big G outs in the dunes. The combination of shock mods and spring kit is the pinnacle of performance for the Max. In addition to the performance improvements the addition of the spring kit will raise your ground clearance another 2 inches. This added height actually rides smoother and more plush than the factory system as well as giving you extra clearance for rocks and rutted trails without needing to ever use a lift kit! This kit is a home run for every driving style since we can tune it just for your car weight, terrain and driving style. Don't waste another minute with your stock Max suspension set up. Get our Stage 2 RIS and enjoy the best ride your car can ever have right NOW!

RIS Stage 2................$1,749.90  includes stage 1 shock work and level 4 spring kit. 

 

Full Dual Rate spring kits are available NOW!

 

                                                                                                    Full Dual Rate Spring kit pictured below

x3-ds-spring-2.jpg

SERIES 6 Bypass tube upgrade.

After months of development we are proud to release our new Series 6 internal bypass tube upgrade. The SERIES 6 upgrade consists of NEW internal bypass tubes that we make in house on the CNC. There are many more bypass ports in different locations, bypass valve stacks, bleed holes and completely different piston and valving with this upgrade. There is no drilling or welding on our high tolerance hydraulic tubing so the piston wear band seal is retained for thousands of miles. Our standard internal mods (Stage 1 Ride improvement system or RIS) create a seriously plush ride while retaining the bump stage needed for the biggest wash outs, jump landings and dune G outs. With the addition of our Series 6 tube upgrade you can add another massive step in plush ride quality and add another 30% more bump stage for those big hits at the same time! This translates into not feeling the rough terrain and whoops at all while still having a smooth transition into a bump stage that is incredible and predictable. Smoother in the rough, stiffer where needed is the best of both worlds. This internal bypass tube upgrade is $99.95 per shock when we are doing our standard kit. We do not sell our bypass tubes by themselves.

Series 6 bypass tube upgrade.....$399.80 per set


CAD drawing of tube

This image has been resized. Click this bar to view the full image. The original image is sized 1642x828.

Name:  Tube 1.JPG.jpeg
Views: 10
Size:  76.3 KB
Tubes fresh out of the laith

This image has been resized. Click this bar to view the full image. The original image is sized 1500x1500.

Name:  IMG_0530.JPG
Views: 10
Size:  751.7 KB
Going into the mill

This image has been resized. Click this bar to view the full image. The original image is sized 1500x1500.

Name:  IMG_1799.JPG
Views: 9
Size:  673.7 KB
4 at a time in the mill

This image has been resized. Click this bar to view the full image. The original image is sized 720x1280.

Name:  IMG_1854.PNG
Views: 9
Size:  470.5 KB
BELOW: This is a typical test session for us. From the left: Stock X3 RS, X3 with Shock Therapy spring kit, X3 with standard RIS (shock work and spring kit), X3 with full kit plus Series 6 upgrade, X3 MAX with full kit and Series 6 tube upgrade. We all drive every car and compare notes. We then make changes that are guaranteed to be advantageous. We do this daily so I am very confident that we quite possibly test more than anyone in the industry. Plus, its the fun part of the job!

This image has been resized. Click this bar to view the full image. The original image is sized 1632x1224.

Name:  IMG_1848.JPG
Views: 1
Size:  631.5 KB

 Other Details

Can Am:
X3 RS Max

 Find Similar Products by Category

Vendors Other Products

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

What's News

newsletter

Follow us on

Copyright 2018 Shock Therapy, LLC. All Rights Reserved.
Sitemap