RS1 Front an Rear Limit Strap Kits
Adjustable front limit strap kit for the FRONT and REAR of the Polaris RZR RS1
Finally a cure for the front end CLUNK on the Polaris RZR RS1! As most people know, at full extension the shocks can make a loud clunk that feels like a hammer against the chassis. If you run aftermarket, heavier wheels and tires this clunk gets much worse. Although the shocks have extension stops internally they are tuned to the factory wheel and tire weight and can't manage any changes in the system so a front end clunk has become the new NORMAL in UTV's. Well, not any more. Our new limit strap kit stops the front end clunk instantly. Limit straps have been used in racing for decades. Trophy trucks and other big off road racing classes have considered them a must forever and so should you. Some of the benefits with our limit strap kits are:
PATENTED, billet aluminum, laser engraved, upper strap mounts
Adjustable, tight clearance clevis system allowing you to adjust the strap length perfectly
Quad layered straps for the best strength and longevity
Accurate sized holes in the strap ends to match the metric hardware in your car
No long spacers required for the lower strap mount that HITS YOUR TIRE
PATENTED, lower strap tab that has ZERO tire clearance issues
Grade 8 hardware through out the kit
Mounting system with the least leverage on the strap
Less strap stretch and longer strap life
Added life for your CVs and Axles and STOPS ALL EXTENSION CLUNKING!
The best fix for your front end noise is here. This is the only kit on the market that does not rub your tires! Limit straps are standard issue for racers and now they should be for YOU too!
Limit straps are a wearing item just like brake pads. They have a lifespan and will need to be replaced once they are worn out. Although they may last longer than your UTV, they are not guaranteed for life.
Installation Video for XP Pro front limit strap kit with Fox Live Valve shocks
2 Reviews Hide Reviews Show Reviews
Nice product with quality parts and it does what it is suppose to do. Then why only 4 stars? The reason is; like a lot of Shock Therapy stuff, what you will get is not complete, there are no instructions included., not even a schematic drawing. A customer will need to find a "You Tube" installation video that is somewhat close to your application, and since these were installed in a location that had limited internet access, what should have been an easy half hour job took much longer. Yes this is a simple instillation, but it does require it to be installed correctly, so come on Shock Therapy, spend a 25 cents more and, at least, include a schematic drawing of where and how the parts are to be installed.
Everything about this product scream quality. Was a little disappointed to not have a paper copy or a link to how to install them. Youtube has video's for XP etc.. Which in turn is the same as a RS1 but still. I should not have to go to Youtube to get these instructions. Also I was shipped 2 different size spacers. Not sure why..